top
all js glsl

CustomSensorVolume

CustomSensorVolume

new

DOC_TBA

See:
Source:

Members

:BufferUsage

DOC_TBA
Default Value:

:Object

User-defined object returned when the sensors is picked.
Default Value:
  • undefined
See:

:Color

The color of the polyline where the sensor outline intersects the central body. The default is Color.WHITE.
Default Value:
See:

:Number

The approximate pixel width of the polyline where the sensor outline intersects the central body. The default is 5.0.
Default Value:
  • 5.0
See:

:Material

The surface appearance of the sensor. This can be one of several built-in Material objects or a custom material, scripted with Fabric.

The default material is Material.ColorType.

Example
// 1. Change the color of the default material to yellow
sensor.material.uniforms.color = new Cesium.Color(1.0, 1.0, 0.0, 1.0);

// 2. Change material to horizontal stripes
sensor.material = Cesium.Material.fromType(Material.StripeType);
Default Value:
  • Material.fromType(Material.ColorType)
See:

:Matrix4

The 4x4 transformation matrix that transforms this sensor from model to world coordinates. In it's model coordinates, the sensor's principal direction is along the positive z-axis. The clock angle, sometimes called azimuth, is the angle in the sensor's X-Y plane measured from the positive X-axis toward the positive Y-axis. The cone angle, sometimes called elevation, is the angle out of the X-Y plane along the positive Z-axis. This matrix is available to GLSL vertex and fragment shaders via czm_model and derived uniforms.


Model coordinate system for a custom sensor
Example
// The sensor's vertex is located on the surface at -75.59777 degrees longitude and 40.03883 degrees latitude.
// The sensor's opens upward, along the surface normal.
var center = ellipsoid.cartographicToCartesian(Cesium.Cartographic.fromDegrees(-75.59777, 40.03883));
sensor.modelMatrix = Cesium.Transforms.eastNorthUpToFixedFrame(center);
Default Value:
See:

:Number

DOC_TBA
Default Value:
  • Number.POSITIVE_INFINITY

:Boolean

true if this sensor will be shown; otherwise, false
Default Value:
  • true

:Boolean

When true, a polyline is shown where the sensor outline intersections the central body.
Default Value:
  • true
See:

:Boolean

Determines if a sensor intersecting the ellipsoid is drawn through the ellipsoid and potentially out to the other side, or if the part of the sensor intersecting the ellipsoid stops at the ellipsoid.

Default Value:
  • false

Methods

DOC_TBA

DOC_TBA

See:

DOC_TBA

DOC_TBA

See:

DOC_TBA

Throws: